A pole saw can easily be one of the best pruning and cutting tools available for thick vine and high branches. It is effortless to use, and you just need very little information to get started with it. You can use it for working around your yard and garden so you won’t need to hire a professional every time some branch starts outgrowing the tree. Pole saws are an amazing and underrated tool because they can help out various tasks around the yard and garden. It is a perfect tool for pruning, styling the tree by trimming the branches.
Cutting thick vine can be difficult, and it’s also hazardous if you are using a ladder to reach and trim the branch. However, if you have a pole saw, you will be able to reach higher branches more efficiently without needing a ladder.
Also read: Best Cordless Pole Saw
Here is the basic rule on how to use a pole saw:
- Brush Clearing: this process includes clearing out the undergrowth and other ground cover using the pole saw. It is done for preparing the ground for construction etc.
- Trimming: this process includes removing excessively dead or dying branches from the tree for safety or tree’s health.
- Pruning: this process involves cutting out the branches to shape the tree for styling purposes or for better growth for the upcoming season. You will need effective planning for this because you have to think about the best season to do it for the best results. For instance, don’t plan your pruning in autumn.
Precautions & Safety Tips for Using a Pole Saw
Here are some of the excellent tips for using the pole saw, and you should keep these in mind and take necessary precautions when using the pole saw.
Using a sturdy cloth for the pole saw is a plus because the branches and dust will fall on you while cutting the branch, and the casualty would be much lesser this way.
You have to ensure that no one is under the tree while you operate the pole saw.
Branches that are thicker than 9 inches are usually tough to cut properly with a pole saw. There’s proper roping required for such branches. You have to be careful when cutting even less thick braches. You can save yourself from many possible troubles if you are careful enough.
Above 8 feet can be heavy
If you are working with the branches that are above 8 feet, then it can be a bit hard to maintain the saw. You have to be careful not to get into any dangerous situation by tiring yourself, and not handling saw well at such height.
Never work nearby electricity lines
You must not work nearby any power source or electric wire because it can really turn bad for you as there are many chances of branches falling on the power supplies and lines and causing trouble and accidents.
Never let the chain be too loose
Pole saw chain is used in the blades, so you have to make sure that the right is properly tight. A loose chain can cause possible trouble or even just damage your pole saw.
There is a measurement meter in the oil box that indicates full to low oil. Keep it in check from time to time to see if more oil is required. This is important because, without the appropriate amount of oil, the operating pole can lead to many damages.
How to cut using a pole saw?
In order to start learning about cutting with a pole saw, you have to learn the basics of pruning, and those are explained below.
Clearing the working area according to the tree size
This is most important before you start using the pole saw. The professionals suggest that you restrict around 50 feet radius to avoid any risk of danger. You also should have someone on guard, so no one enters the area while you are operating the pole saw.
Although small branches can be very harmless, they can cause an accident, for instance, one can trip over them, and even bigger accidents can happen, so make sure no one is roaming around the working area.
Plan properly before cutting
When you are planning to prune the tree branches, sometimes the branches are positioned in a difficult and fragile place. There might be some hut, power source, or a fence. So, before starting to cut, you have to plan properly about how to execute the cut.
Start off from lower branches
You have to cut off the lower limbs first in order to reach higher branches. Therefore, you must start off from the lower branches and make your way through to the higher branches, and the cuts will be smooth this way.
Positioning of saw
You have to grab the saw with both hands in a comfortable manner. You have to put your right hand on the trigger and use your left hand to hold the body of the saw.
Place the saw correctly to the branch where you want to make a cut.
Stand at the right angle
You can’t stand under the branch you are cutting, that would be disastrous. You have to angle yourself at a safer spot from where there is no risk of a branch falling on you when you make the cut.
This is quite an easy task because if you follow all the tips provided above, you can reach the desired branch of the tree, place the saw on the top of the respective limbs. Switch your saw, and the branch will start cutting. You have to make a jump cut if the branch is thicker, make a cut underneath first. This way, the pruning of thick branches will be easier.
Make the cut and clean the area
You can adjust the pole’s speed as per the perfect groove that fits you and finish the cut. It would be best if you cleaned the previous branches (store them probably) before making the next cut.
Using a pole saw is quite simple. You just need to get through the process once, and you will get familiar with it quickly.